Bixpy DIY Fin Adapter for Inflatables

If you own an inflatable kayak or an inflatable stand up paddle board and would like to motorize it, you now have the perfect companion: the Bixpy Adapter for Inflatables.

You can attach this adapter to any inflatable watercraft using PVC or urethane adhesive glue.

For inflatables that don’t have a fin box/plate, you can glue the provided flexible fin plate to the bottom of your vessel using PVC or urethane adhesive glue. Then using the provided Slide & Lock adapter, you'll be able to easily slide your Bixpy J-2 Motor onto your newly installed fin box. 

This fin box does NOT ship with adhesive as you will need to select your own adhesive depending on what you will be installing the adapter to. The fin box material is PVC. So if you're gluing to a PVC surface, you can use a PVC to PVC adhesive. If you're gluing your fin box to another type of surface, you should do some research and make sure to use the appropriate adhesive. If you have doubts about your boat's construction, please contact your boat maker for the best advice or and we will help you out.

Bixpy DIY Fin Adapter For Inflatables Specifications:

• Compatible with Bixpy K-1 and J-2 motors
• Includes: Bixpy Adapter for Inflatables, All hardware required, Inflatable Fin Box - Adapter, Bixpy Slide & Lock Fin Adapter, and Instructions
• Additional Features: Easily attached to your Bixpy Jet Thruster
• Cable Length From Motor Connector End To Adapter Connector End: 4.3 feet (1.3 m)
• Thruster Draft: 9" (23 cm)
• Adapter: Attach a fin box to the bottom of your kayak or stand up paddle board and simply plug the adapter into the fin box
• Protection: Water-proof, dirt-proof and corrosion resistant housing and components
• Water Use: Marine grade stainless steel components for salt water or fresh water use
• SKU: AT-INK-2101